LieMo products are developed for marine, automotive and industrial installations where voltages, currents and controls must remain predictable.
Measure the tank level through the tank wall. No drilling, nothing in the liquid.
Charge several batteries efficiently from one alternator or charger, without voltage drop and without current flowing back between batteries.
Suitable for 12V and 24V installations and usable in wider DC systems.
Available for installations with several battery banks of the same nominal voltage.
No diode compensation needed, so batteries can be charged fully.
The Battery Isolator is connected between the alternator/charger and the battery banks. The negative connection runs directly to the batteries; the distribution takes place on the positive side.
| Model | Max. current | Voltage range | Input | Outputs | Dimensions |
|---|---|---|---|---|---|
| Corus 100-1E-2IG | 100 A | 8-30 VDC | 1 x M6 | 2 x M6 | 146 x 85 x 97 mm |
| Corus 100-1E-3IG | 100 A | 8-30 VDC | 1 x M6 | 3 x M6 | 146 x 85 x 158 mm |
| Corus 150-1E-2IG | 150 A | 8-30 VDC | 1 x M8 | 2 x M6 | 146 x 85 x 97 mm |
| Corus 150-1E-3IG | 150 A | 8-30 VDC | 1 x M8 | 3 x M6 | 146 x 85 x 158 mm |
| Corus 180-1E-2IG | 180 A | 8-30 VDC | 1 x M8 | 2 x M8 | 146 x 85 x 97 mm |
| Corus 180-1E-3IG | 180 A | 8-30 VDC | 1 x M8 | 3 x M8 | 146 x 85 x 158 mm |
| Corus 230-1E-2IG | 230 A | 8-30 VDC | 1 x M8 | 2 x M8 | 146 x 85 x 97 mm |
| Corus 250-1E-3IG | 250 A | 8-30 VDC | 1 x M8 | 3 x M8 | 146 x 85 x 158 mm |
Powers a 12V lighting installation on a trailer from a vehicle, regardless of whether the vehicle runs on a 12V or 24V electrical system.
Supports both supply systems for vehicles with trailer lighting.
Separate conversion channels for the main trailer light functions.
| No. | Function | Colour | Power |
|---|---|---|---|
| 1 | Left light IN/OUT | Black | 30 W |
| 2 | Left indicator IN/OUT | Yellow | 21 W |
| 3 | Brake lights IN/OUT | Red | 40 W |
| 4 | Right light IN/OUT | Brown | 30 W |
| 5 | Right indicator IN/OUT | Green | 21 W |
| 6 | Rear fog light IN/OUT | Blue | 21 W |
| 0V | Ground connection | White | – |
| 24V 7-pin | 12V 7-pin | 12V 13-pin | Function |
|---|---|---|---|
| 2 black | 7 black | 7 | Left light |
| 3 yellow | 1 yellow | 1 | Left indicator |
| 4 red | 6 red | 6 | Brake lights |
| 6 brown | 5 brown | 5 | Right light |
| 5 green | 4 green | 4 | Right indicator |
| – | 2 | 2 | Rear fog light |
| 1 white | 3 white | 3* | Ground connection (*pins 1-8) |
| – | 8 | 8 | Reversing light |
| – | 9 | 9 | Permanent positive |
| – | 10 | 10 | Charging current for an extra battery |
| – | 2 blue | 11 | Free pin |
| – | 12 | 12 | Free pin |
| – | 13* | 13* | Ground connection (*pins 9-12) |
| – | 7 blue | 7 blue | Trailer brake control |
Protects the battery and installation against deep discharge, overvoltage, overload and overheating by automatically disconnecting loads.
Fully automatic wiper control systems for boats and yachts, with synchronisation, interval programmes, washer function and automatic protection.
For up to 4 wipers, divided into 2 groups. Microcontroller-driven for optimal synchronisation and operation via 3 buttons.
For boats and yachts with up to 2 wipers. A compact system for synchronised operation and a longer wiper life.
A modular system for large vessels with up to 9 wipers. Power modules and control panels allow a flexible installation.
Visit the downloads page for manuals, or contact us about applications, availability and versions.